Key Blanks For Your Truck
Your one-stop shop for all blank keys for trucks. Simply select the manufacturer of your vehicle from the left column and view all the possible key blank options.
They look like metal keys, but the top is made of plastic and houses a transponder. Truck drivers love these keys. They reduce the chances of theft by reducing the likelihood of accidental duplicates.
Transponder Keys
Transponder keys, also referred to as chip keys, come with a microchip which transmits a unique signal when they are inserted into ignition. The computer system of the car checks the code and starts the engine if it is in line with. This is a significant advancement in anti-theft and is available on nearly all modern vehicles produced over the past 20 years.
You should replace your transponder key immediately if you notice it is not working properly. A malfunctioning chip can prevent the car from starting because it will not send the correct signal to its computer. This can leave you stranded and in a risky or dangerous position. It could also damage other parts of your vehicle, which could result in expensive repairs.
When a transponder begins to fail, warning signs will be displayed on the dashboard. They could include specific warning lights as well as error messages, and could be quite helpful in determining what is wrong. A professional locksmith who is familiar with transponder keys will be in a position to assist you in determining the cause of the malfunction, and ensure that it is addressed prior to being left stranded.
A transponder key could cease to function due to physical damage or a malfunction with the programming. These problems are difficult to identify and require a specialist to fix. It is crucial to find an auto locksmith in your area who has experience working with transponder keys, since they will be able to repair or replace them more easily than a car dealership.
Non-transponder keys are made of a flat metal piece that fits into the head of the key. The key cuts are aligned to the tumblers of your ignition and are held in place using spring-loaded clips. Keys can be made by any certified automotive technician, and are usually less expensive than transponder keys. They are not as secure or safe as transponder keys, and they have a higher chance of theft or duplication that is not authorized.
Keys for VATS
VATS keys were commonly used in older GM cars and trucks to increase their security. The keys function by using an embedded resistor to confirm that you're using the correct ignition key to begin the vehicle. The key can also be used to disable the motor in the event that the incorrect key is used. This makes it harder for thieves to rob the vehicle and discourages them from doing so.
The VATS system was first introduced in 1986, along with the Corvette, and soon spread to other GM automobiles. Its simplicity and effectiveness allowed GM to decrease the theft rate of vehicles that were popular. Later, more sophisticated systems like transponder keys were added.
Each VATS key is equipped with a resistor pellet in the key blade. It has one of 15 VATS codes (resistance values). The key is then placed in the ignition switch, and the VATS control module routes an electric current through the pellet. This determines the vats code or the resistance of the key. truck key cutting signals the fuel pumps and starter that it is an mechanical key.
There are two leaf contacts in the lock cylinder which connect to the VATS key pellet. They are connected to ignition control module via two wires: a white/purple and a black/white pair. These wires may break or become disconnected due to the constant flexing needed to operate the lock-cylinder. The circuit also has the two-wire connector at the base the steering column. The connector may fail due to wear or moisture or pressure.
The resistance of the key pellet is determined by putting the leads of an ohm meter across the resistor and observing the Ohms. The Ohms are then matched to the vats code in a VATS chart. This can assist locksmiths identify the right VATS key blank to cut when the customer requires an replacement key. This is also known as VATS relearn. The same procedure can be used for resetting Passlock or Passkey systems on GM vehicles. This is a simple, but lengthy process that requires the right tools.
Key Fobs
A key fob, or small electronic device that replaces your car key. The fob is equipped with an RFID chip which can transmit an unique code that allows you to unlock the door locks. It is also programmable, so it can be set to allow only certain users access while keeping other users from entering. Fobs are typically used in commercial settings to control access to parking areas and automating the process of opening or closing doors and gates.
Batteries for fobs need to be replaced on a regular basis. Batteries can be bought on the internet, at big box retailers and hardware stores. You can change the battery on your own if you are handy. You can locate detailed instructions in the owner's manual, or look up YouTube videos that show the simple procedure.
If you require a new fob for your car, it's usually best to visit the dealership. Depending on your vehicle's model and make, you may need technical assistance that is only available at the dealership's service center.
Fob technology is evolving, and the latest smart fobs are able to provide an array of additional features. Some fobs, like can combine the short-range signal needed to open a door, and an extended range signal to open a gate into one device, eliminating the need to carry two separate devices. The fobs could also have several buttons as well as LED indicators to inform you if the fob is inactive or active.
Advanced fobs utilize encryption and other measures to guard against attempts to hack. The older, unencrypted credentials of fobs could be copied or copied however, newer fobs use rolling codes, which generate and transmit a unique code every time a button is press. The frequent changes in codes make it difficult for malicious hackers to copy and hack fobs.
Some smart key fobs can be used with smartphones and communicate with IoT devices to provide more automated functions. For instance a smart key fob can communicate with your home's security system, or your thermostat's smart sensor to adjust based on your commute time and where you are.
Keyless Entry
Keyless entry is a convenient feature that doesn't require you to insert your keys. Press the button on the fob of your key and you will be able to quickly unlock your vehicle. This feature can be particularly useful for businesses with large fleets of vehicles since it can provide a greater level of efficiency and ease of use.
This technology also offers enhanced security, as many keyless entry systems use advanced encryption signals which make it impossible to break. This technology can be used to stop theft, especially when paired with other security features like GPS tracking. This can also be a boon for fleets that manage their vehicles with integrated software, as it gives an accurate view of whereabouts of every vehicle at all times.
Kits for passive keyless access are available from VAIS Technology to equip virtually any vehicle model with passive keyless access. This lets the driver lock their car before they touch a handle, switch their lights on as they approach, or turn on any of 10 other electronic accessories that can be activated by proximity.
Keyless entry isn't a fad. It's part of modern technology of the automobile. With 62% of all new vehicles offering remote start and keyless entry as standard features, it's obvious that they offer a range of benefits. It is important to remember that your key fob may be stolen if it is not properly protected. It's recommended to store your key fob in a signal-blocking pouch or box when not in use and to keep it in a garage or any other secure place.